Avaya CMC1 Installation Manual page 287

•
Host : leave blank or enter
•
R emote Port : 0
•
Local Port : must match the value of Remote Port on the IP Services screen of the
Communication Manager software
6
Press ENTER and select Save & Exit to effect the changes.
7
Press ENTER again to view the Administration Menu.
8
Select kill to disable the port connection.
9
Repeat the steps for each additional port you want to administer.
10
When administration is complete, from the Connections Menu, select logout (or press Ctrl D).
11
Close HyperTerminal.
At this point, you have established a connection path from the adjunct through the IOLAN+ to the
.
Testing
1
On the system management terminal, press ENTER to get the login prompt to the
Communication Manager switch.
NOTE:
If you get garbled text, check the baud rate setting on the Port Setup Menu. You can adjust
it up or down.
2
If no login prompt appears, log back into the IOLAN+ through HyperTerminal.
3
Select Admin mode > stats and press ENTER twice.
4
Select users and press ENTER.
5
Look at the port that the adjunct is connected to and see if there is any traffic. If not, check all
your connections and administration fields.
** Administrator **
1. port1
2. port 2
3. port 3
4. port 4 modem
REM <unknown>
LOG
________________________________________________________________________________
Press <RETURN> to see list of options.
IOLAN PLUS v4.02.00 a CDi
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
IP Address
SERVER STATISTICS
Talking to host 172.22.22.67.5111<DSR+CTS+DCD >DTR+RTS
SERVER STATISTICS
waiting for DSR or DCD
waiting for DSR or DCD
logged out
logger not enabled
Adding or Removing Hardware
Install terminal server
Terminal: 2
<DSR+DCD >DTR+RTS
>DTR+RTS
>DTR+RTS
iolan-st
287