To establish LAN connections the TN2501AP circuit pack requires a
•
Backplane Adapter
corresponding to the TN2501AP integrated announcement circuit pack slot.
•
LAN cable
Backplane Adapter
Figure 85
shows the Backplane Adapter.
Figure 85: Backplane Adapter (Comcode 848525887)
Figure notes
1
Amphenol connector attaches to
the back of the switch cabinet,
corresponding to the TN2501AP
circuit pack slot.
LAN cable
The TN2501AP circuit pack does not include cables to connect the circuit pack to your LAN. The
following table lists the cable category and connection port.
Ethernet connection speed
10 Mbps
100 Mbps
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
that attaches to the Amphenol connector on the back of the cabinet,
that attaches to the Backplane Adapter.
3
addfipm2 KLC 083000
Cable
Category 3
Category 5
Adding or Removing Hardware
Add Integrated Announcements/TN2501AP
2
1
2
RJ-45 LAN cable connection
•
10 Mbps uses Category 3 cable.
•
100 Mbps uses Category 5 cable.
3
This connector is not used for VAL.
Connection description
Connects through the RJ45 jack
(note #2 in
Figure
85),
Connects through the RJ45 jack
(note #2 in
Figure
85),
221