Administering Ip Services - Avaya CMC1 Installation Manual

Administering IP services

For each adjunct that you connect using TCP/IP, you need to administer IP services to establish the IP
address/TCP port pairing. The IP address is associated with the node name that you just administered. In
this example, we are administering the primary CDR connection as end-to-end TCP/IP.
1
Type change ip-services
2
In the Service Type field, enter CDR1 for the call accounting link.
change ip-services
Service
Type
CDR1
3
In the Local Node field, enter the node name for the switch. In this example, switch-clan is the
local node.
4
The Local Port field defaults to 0 for all client applications. You cannot make an entry in this
field.
5
In the Remote Node field, enter the node name for the adjunct, as administered on the Node
Names screen. For the call accounting application, type callacctg. Since the PMS application
routes through the terminal server, termserver is the remote node for this service type.
6
In the Remote Port field, enter the TCP listen port assigned to the adjunct. The recommended
value for CDR1 is 5101, and the recommended value for PMS is 5103.
NOTE:
This number must match the port administered on the end device. If you are using the
Downloadable Reliable Session-Layer Protocol tool, this must match the port
administered in the Server application. If you are using a terminal server, this number
must match the
for your Call Accounting system to determine the appropriate port for the CDR device.
7
Move to Page 3. Type n in the Reliable Protocol field for the CDR Service Type. You do
not use RSP with a terminal server.
change ip-services
Service Reliable
Type Protocol
CDR1
8
Press ENTER to save your changes.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
and press RETURN to assign the CDR endpoint.
IP SERVICES
Enabled Local
Node
switch-clan
number on the Port Setup menu. Consult the documentation
Local Port
SESSION LAYER TIMERS
Packet Resp
Timer
n 3
Adding or Removing Hardware
Local Remote
Port Node
0 callacctg
Session Connect SPDU
Message Cntr Cntr
1 1
Install terminal server
Page 1 of 3
Remote
Port
5101
Page 3 of 3
Connectivity
Timer
1
289