Avaya CMC1 Installation Manual page 49

Top-Mounted MDF
Use this configuration when the cabinet is wall-mounted, and is near the floor. Do not use this
configuration for cabinet A.
Figure 17: Typical Top-Mount MDF Cable Routing
Figure notes
1 Main distribution frame (MDF)
2 Connect cable 1 to slot 1
1
On the rear of the MDF, cut the cable tie securing the top 5 cables to the MDF mounting frame.
2
Mount the MDF to the right panel. See
3
Secure all 10 cables to the bottom left bracket on the MDF with a cable tie.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
10 9 8 7 6
10 9 8 7 6
5 4 3 2 1
5 4 3 2 1
Installing and Cabling the Cabinets
Install Main Distribution Frame (MDF) and External Modem
1
2
3
4
5
6
7
8
9
10
2
3 #12 x 1-inch shoulder screw
Figure 17.
1
3
cadmmdf2 KLC 070698
49