Testing The Tdm Bus For Each Pn; Saving Translations, If Required - Avaya G650 Installing

Testing the complete configuration

Testing the TDM bus for each PN

To check each TDM bus for each PN in the configuration.
1. Type test tdm port-network 1 and press Enter.
2. If the result is FAIL for any test, check the connectors of the TDM bus cables in PN 2.
3. Repeat these steps to check the TDM bus cables for each PN.

Saving translations, if required

To save translations to the hard drive:
Type save translations and press Enter.
●
60 Installing the Avaya G650 Media Gateway