Avaya CMC1 Installation Manual page 281

Figure 104: Connecting an adjunct to the IOLAN+
Figure notes
1 C-LAN circuit pack
2 Local area network (LAN)
3 IOLAN+ 104 terminal server
4 Adjunct (system management
terminal or a system printer, for
example)
Follow these typical steps:
NOTE:
Depending on the adjunct's connections, you may not need all of these pieces.
1
Connect the null modem adapter to COM1 port on the adjunct.
NOTE:
The null modem is an important element in this setup. Without it, data may not transfer
correctly.
2
Connect the other end of the null modem adapter to the DB25 to RJ45 cable.
3
Connect the RJ45 end to any port on the IOLAN+.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
8
2 5
7
1
DATA CONNECTIONS ONLY - NOT FOR TELECOM USE
1 2 3 4
5 Null modem
6 PC or laptop (for initial administration)
7 DB25-to-RJ45 cable
8 DB25-to-DB9 cable
Adding or Removing Hardware
Install terminal server
6
5
4
7
3
10BASE-T 5VDC
281