Espa Radio Paging; External Ringing - Avaya CMC1 Installation Manual

ESPA radio paging

Figure 126 shows typical connections to European Standard Paging Access (ESPA) equipment. Connect
the LINE jack on the PassageWay interface to a digital line 4-wire DCP circuit pack through the MDF.
Figure 126: Typical ESPA radio paging connections
1
Figure notes
1 DCP telephone
2 4-pair modular cord
3 PassageWay interface
4 4-pair modular cord
5 103A or modular wall jack

External ringing

Connections for external ringing are at an information outlet. The system side of the main distribution
frame (MDF) is connected to a TN2183 (or equivalent) analog line circuit pack in an MCC1, SCC1, or
CMC1 Media Gateway.
NOTE:
Up to three devices can be connected to one analog line circuit pack port.
1
Wire the ringing device to the information outlet.
2
Administer the switch for the new equipment.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
Install paging and announcement equipment
3
LINE
PHONE
POWER
2
9
8
6 To digital line circuit pack
7 RS-232 connector
8 ESPA radio paging
equipment
9 Loudspeaker paging system
Adding or Removing Hardware
5
4
6
7
cydf004 RPY 123097
329