Converters For Single-Carrier Cabinets - Avaya CMC1 Installation Manual

Converters for single-carrier cabinets

PRI-to-DASS and PRI-to-DPNSS converters
Figure 115 shows typical connections from the CCSC-1 PRI-to-DASS converter or the CCSC-2 PRI-to-
DPNSS converters to the coaxial facility.
Figure 115: Typical DASS or DPNSS converter cabling
Figure notes
1 To TN464GP DS1 circuit pack and
either a CSCC-1 PRI-to-DASS
converter or a CSCC-2 PRI-to-
DPNSS converter circuit pack
2 Communication Manager
administration PC
3 RS-232 cable to front of PRI
converter circuit pack
1
Plug the PC into the RS-232 connector on the front of the PRI converter circuit pack.
2
Connect the coaxial Y-cable from the TN464GP to the PRI converter circuit pack.
3
Connect the opposite end of the Y-cable to the 888B coaxial converter.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
Adding or Removing Hardware
.Install ISDN converters and adapters
0001 0 RBP 051396
4 888B coaxial converter
5 Coaxial connection to 2-Mbps
facility
6 Coaxial cable from PRI
converter circuit pack to coaxial
converter
315