Avaya CMC1 Installation Manual page 262

Adding or Removing Hardware
Add IP Solutions
Administration Steps
1
Log in as craft.
2
Type change circuit-pack and press Enter.
3
Check the Code column to see if the slots above the TN802B say DSMAPD or MEDPRO.
.
change circuit-packs
01: TN754
02: TN758
03: TN2144
04: TN746
05
06: TN771
07: TN464
08: TN2140
09: TN767
10: TN799
4
If MEDPRO, go to the entry just above the TN802B that says MEDPRO.
5
Type DSMAPD, and press Enter. Changing the one entry automatically changes the entry above
it. If it is in IP Trunk mode, you get the following error message:
MedPro type requires TN802 with application. Type MEDPRO on circuit-packs
form.
Log onto the TN802B Interface Server
If administered remotely through pcANYWHERE:
1
Dial in to the server through pcANYWHERE using the dialup number supplied.
2
Click on the pcANYWHERE Remote Host Computer button on the toolbar to send CTRL ALT
DEL to the host.
3
Type administrator in the
4
Type iptrunk in the
5
After logging on for the first time, change the administrator password and, if desired, the user
name, to ensure security. See your Windows NT server documentation for details.
If administered locally on a monitor, keyboard, and mouse:
1
Press CTRL, ALT, and DEL simultaneously.
2
Type administrator in the
3
Type iptrunk in the
4
After logging on for the first time, change the administrator password and, if desired, the user
name, to ensure security. See your Windows NT server documentation for details.
262
Cabinet: 1
Slot Code Sf Mode Name
DIGITAL LINE
POOLED MODEM
ANALOG LINE
B ANALOG LINE
C MAINTENANCE/TEST
F DS1 INTERFACE
E&M TIE TRUNK
E DS1 INTERFACE
B CONTROL-LAN
'#' indicates circuit pack conflict.
User Name
field and click OK.
Password
User Name
field and click OK.
Password
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
CIRCUIT PACKS
Carrier: A
Carrier Type: processor
Slot Code
11: DSMAPD
12: DSMAPD
13: TN802
14:
15:
16:
field.
field.
Page 1 of 5
Sf Mode Name
RESERVED-IP
RESERVED-IP
B MAPD BOARD
June 2004