Avaya CMC1 Installation Manual page 256

Adding or Removing Hardware
Add IP Solutions
Installing in IP Trunk Mode
NOTE:
IP Trunk mode should only be used to maintain compatibility with existing IP Trunk or
ITS-E installations. We strongly recommend that you use the MedPro mode whenever
possible.
Prepare for Installation
Have the following equipment on site before your shipment arrives:
•
A mouse, keyboard, and VGA monitor for use during the installation of the server. You also need
AC power outlets for the modem and monitor.
•
Three adjoining, unoccupied port slots in the carrier
The TN802B IP Interface slides into only 1 slot, but its faceplate occupies 3 slots.
•
A 10 BaseT or 10/100 BaseT Ethernet connection into the customer's local area network (LAN)
•
A valid, unused IP address on the customer's LAN that can be assigned to the IP Interface server.
You also need the subnet mask, default gateway, domain name, and so forth from the customer's
network administrator.
•
An analog telephone line reserved for the IP Interface diagnostic modem
•
A valid telephone number reserved for the IP Interface diagnostic modem
If non-U.S. customer:
•
Modem comparable to a U.S. Robotics, Inc. Sportster Model USR 33.6 EXT.
•
A cable from the modem to the TN802B external cable assembly.
We recommend that you protect the cabinet where the IP Interface is installed with an uninterruptable
power system (UPS).
Check your Shipment
When your shipment arrives, check the contents (see
1
Inspect the shipping carton for damage before opening it. If the box is damaged, do not open it.
Inform the shipping company, and ask for instructions on filing a claim.
2
If the box is undamaged, check the contents against the packing slip. Check the condition of each
component, and note any damage or shortages on the packing slip. The carton should contain the
following for each IP Interface ordered:
.
Table 61: Required Hardware
Comcode/Code
J58890MA-1 L30
601939804
407633999
256
Description
TN802B IP Interface Assembly
H600-512,G1 external cable assembly
U.S. Robotics Sportster external modem, model
number USR 33.6 EXT (U.S. customers only)
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
Table 61, Required Hardware,
Quantity
1
1
1
1
on page 256).
1 of 2
June 2004