Converters For Multi-Carrier Cabinets - Avaya CMC1 Installation Manual

Converters for multi-carrier cabinets

PRI-to-DASS and PRI-to-DPNSS converters
1
Connect the Communication Manager administration PC to the RS-232 connector on the front of
the PRI converter circuit pack.
Figure 117
PRI-to-DPNSS converters to the coaxial facility.
Figure 117: Typical DASS or DPNSS converter cabling
Figure notes
1 To TN464GP DS1 circuit pack and
either a CSCC-1 PRI-to-DASS
converter or a CSCC-2 PRI-to-
DPNSS converter circuit pack
2 Communication Manager
administration PC
3 RS-232 cable to front of PRI
converter circuit pack
PRI-to-BRI converter
Figure 118 shows typical connections from the PRI-to-BRI converter to the coaxial facility. The
Communication Manager administration PC is connected to the RS-232 connector on the front of the PRI
converter circuit pack.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
shows typical connections from the CCSC-1 PRI-to-DASS converter or the CCSC-2
Adding or Removing Hardware
.Install ISDN converters and adapters
A LARMS
C
E M E R TR R A
D
I
N
U
E S
AUDIX
4 888B coaxial converter
5 Coaxial connection to 2-Mbps
facility
6 Coaxial cable from PRI converter
circuit pack to coaxial converter
0011_0 RBP 060696
317