Avaya CMC1 Installation Manual page 285

Rebooting the IOLAN+
You must reboot the server any time you change an IP address or Local Port value.
1
Press ENTER to view the Administration Menu.
** Administrator **
access
change
gateway
host
kill
line
port
quit
reboot
server
stats
trap
Port
________________________________________________________________________________
IOLAN PLUS v4.02.00 a CDi
NOTE:
The following steps re-initialize the IOLAN+ so it knows it's connected to the LAN
through its IP address.
2
Select reboot and press ENTER.
3
Press the space bar to restart the IOLAN+.
Administering the gateway
NOTE:
If the and IOLAN+ are in the same subnet, skip this step.
1
Select Admin mode > Password and press ENTER.
2
Type iolan and press ENTER.
3
Select gateway to access the Gateway menu
4
Fill in the following fields for Entry 1:
•
Destination :
•
Gateway :
•
Netmask :
NOTE:
The following steps re-initialize the IOLAN+ so it knows it's connected to the LAN
through your gateway.
5
Select reboot and press ENTER.
6
Press the space bar to restart the IOLAN+.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
ADMINISTRATION MENU
Remote System Access (PPP).
Change login and/or admin password.
Examine/modify gateway table.
Examine/modify host table.
Kill TCP connections on serial line.
Terminal configuration organised by line.
Terminal configuration organised by port.
Return to connections menu.
Reboot Server.
Examine/modify Server parameters.
Examine Server statistics.
Examine/modify SNMP Trap parameters.
[2 ]
IP address
Gateway address
Subnet mask
Adding or Removing Hardware
Install terminal server
Terminal: 2
iolan
285