Add Tie Trunks; Requirements; Installation - Avaya CMC1 Installation Manual

Add Tie Trunks

Requirements

Each tie trunk connects to 1 port of a 4-port tie trunk circuit pack or to an assortment of international tie
trunk circuit packs.

Installation

1
Determine the port assignment of the trunk from the trunk group screen.
EXAMPLE:
2
Install the tie trunk or an international tie trunk circuit pack in assigned carrier slot (if an
additional circuit pack is required).
3
For customer-owned (not leased) tie-trunk facilities (such as campus environments), tie trunk
circuit packs provide signaling capabilities beyond those specified by the industry-wide E&M
standard. Use
Tie Trunk Option-Switch Settings and Administration,
signaling format, set switches on the circuit pack, and administer the port.
4
Administer forms listed under "Tie Trunk Group" in the Administrator's Guide for Avaya
Communication Manager.
Figure 83: Tie Trunk Circuit Packs (Component Side)
UNPROT
4 3 2 1
PROT
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
3 A
Cabinet (Port Carrier
Network)
Figure 83, Tie Trunk Circuit Packs (Component Side),
SMPLX
PORT 4
E & M
Adding or Removing Hardware
07 01
Slot Port
Number Number
on page 216 to choose the preferred
SMPLX SMPLX
PORT 3 PORT 2
E & M E & M
Add Tie Trunks
on page 215 and Table 55,
SMPLX
PORT 1
E & M
r758183 RBP 050896
215