Avaya CMC1 Installation Manual page 92

Installing and Cabling the Cabinets
Install and Wire Telephone Power Supplies
Figure 42: Typical Wiring to a Telephone
11
12
Figure notes
1 Power Supply Kit
2 2.5, 5.0, or 8.0 Amp Hour Battery
3 1146B2 Distribution Unit
4 1145B2 Power Supply
5 Circuits 1-16
6 Circuits 17-32
7 Port Circuit
Reset LEDs on Power Distribution Unit
A red LED next to any of the 32 power output connectors indicates a short circuit in the building wiring
or the terminal equipment. To reset the LED:
1
Disconnect the terminal equipment from the wall jack.
2
If the LED goes off, the terminal equipment is faulty and must be replaced. If the LED is still lit,
find and repair the short circuit in the building wiring.
3
Reconnect the terminal equipment to the wall jack and retest terminal equipment operation.
92
1
2
4
7
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
3
5 14 6
14
8
9
8 Main Distribution Frame
9 Modular Cord
10 Pins 7 and 8 (Display Terminal Power)
11 AC Input
12 Installer-Provided Ground Wire
13 ISDN/ Display System Protocol Terminal
14 Circuits 1-32
13
10
9
June 2004