Avaya DEFINITY Server CSI Maintenance Manual page 1318

Table 319. TEST #7 Conference Circuit Test — Continued
Error Test
Code Result
1004 ABORT
1018 ABORT
1020 ABORT
2000 ABORT
2100 ABORT
Any FAIL
PASS
1318
Issue 5 October 2002
Description/ Recommendation
The port has been seized by a user for a valid call. Use status station or
status trunk to determine when the port is available for testing.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Maintenance is disabled on this trunk.
1. Enable maintenance by entering y in the
field on page 2 of the change trunk-group form.
The test did not run due to an already existing error on the specific port or a
more general circuit pack error.
Examine Error Log for existing errors against this port or the circuit pack and
attempt to diagnose the already existing error.
Response to the test request was not received within the allowable time
period.
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
The NPE of the tested port did not conference the tones correctly. This will
cause noisy and unreliable connections.
1. Replace the circuit pack.
The port can correctly conference multiple connections. User-reported
troubles on this port should be investigated using other port tests and
examining station, trunk, or external wiring.
Maintenance Tests?
Continued on next page
555-233-119