Avaya DEFINITY Server CSI Maintenance Manual page 1586

Maintenance Objects
Speech Synthesis PSS Handshake Test (#168)
This test verifies control functionality between the on-board microprocessor and
PSS controller. A failure occurs if either of the following events occur:
The on-board microprocessor times out while waiting for the PSS controller
to respond.
An invalid command is received by the on-board microprocessor from the
PSS controller.
This type of failure affects all four ports on the Speech Synthesis circuit pack,
resulting in errors or alarms on each port.
Table 453. TEST #168 Speech Synthesis PSS Handshake Test
Error Test
Code Result
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1000 ABORT System resources required to run this test are not available. The port may be
busy with a valid call and therefore unavailable for certain tests. You must wait
until the port is idle (yellow LED if off) before retesting.
1. If the port is idle, retry the command at 1-minute intervals a maximum of 5
2000 ABORT Response to the test request was not received within the allowable time period.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Any FAIL The on-board microprocessor has timed out while waiting for the PSS controller
to respond or an invalid command has been received by the on-board
microprocessor from the PSS controller. This type of failure may cause features
using the Speech Synthesis Port's speech services to malfunction.
1. Replace the circuit pack.
PASS The on-board microprocessor/PSS handshake is working correctly.
User-reported troubles should be investigated using other tests and verifying
other ports on this circuit pack are working correctly.
1586
Issue 5 October 2002
Description/ Recommendation
times.
Continued on next page