Avaya DEFINITY Server CSI Maintenance Manual page 1579

S-SYN-PT (Speech Synthesis Port)
Table 446. TEST #6 NPE Crosstalk Test — Continued
Error Test
Code Result
1020 ABORT
2000 ABORT
2100 ABORT
Any FAIL
PASS
555-233-119
Description/ Recommendation
The test did not run due to an already existing error on the specific port or a
more general circuit pack error.
1. Examine Error Log for existing errors against this port or the circuit pack
and attempt to diagnose the already existing error.
Response to the test request was not received within the allowable time
period.
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
The NPE of the tested port was found to be transmitting in error. This
causes noisy and unreliable connections.
1. Replace the circuit pack.
The port is correctly using its allocated time slots. User-reported troubles on
this port should be investigated using other port tests and examining the
Error Log.
Continued on next page
Issue 5 October 2002
1579