Avaya DEFINITY Server CSI Maintenance Manual page 1636

Maintenance Objects
Table 475. TEST #619 BRI Port Local TDM Loop Around — Continued
Error Test
Code Result
1005 ABORT
2000 ABORT
2012 ABORT
2100 ABORT
2103 ABORT
1, 2 FAIL
7, 8 FAIL
PASS
1636
Issue 5 October 2002
Description/ Recommendation
This test is not valid for this type of translation. Ports administered as ASAI
or ADJK cannot run this test because the B channels associated with the
port are not used by ASAI or Avaya Adjunct Links. This is a normal
condition.
Response to the test was not received from the BRI-LINE circuit pack within
the allowable time period.
1. If this result occurs repeatedly, attempt to reset the circuit pack with the
busyout board PCSS and the reset board PCSS commands if the
other ports on the board are not in use.
2. If this result occurs again, replace the circuit pack.
Internal system error
Could not allocate the necessary resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
The system could not make the conference connection for the test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
The TDM Looparound failed on one of the channels.
Error Code 1 — TDM Loop Around Test failed on B1.
Error Code 2 — TDM Loop Around Test failed on B2.
The Conference Circuit Test failed on a B-channel.
Error Code 7 — test failed on B1
Error Code 8 — test failed on B2.
1. If the test fails repeatedly, attempt to reset the circuit pack with the
busyout board PCSS and the reset board PCSS commands if the
other ports on the board are not in use.
2. If the test fails again, replace the circuit pack.
The BRI Port Local TDM Loop Around Test passed.
Continued on next page