Avaya DEFINITY Server CSI Maintenance Manual page 1334

Maintenance Objects
License-Error
— License File serial number does not match the hardware
— System software versions do not match
— Feature usage exceeded
— System cannot verify the standby serial number (duplex only)
— License has expired
No-License
— System software versions do not match
— License File missing or could not be installed
— Offer Categories do not match
— The condition(s) that caused the system to enter License-Error
— The switch returns to License-Normal mode when the license errors
Log in warning messages
If the system is in either License-Error or No-License modes, anyone logging on
to the System Access Terminal (SAT) receives a warning message, depending on
the conditions.
When "License Error: Serial Number Mismatch" (or some other description)
appears, the system is telling you that
— The switch is in License-Error mode.
— The system detected a license file serial number mismatch between
When "Call Processing Will Be Blocked in Approximately xxx hours"
appears, the system is telling you that
— The switch is in License-Error Mode.
— The 10-day countdown timer has started and you have xxx hours
When "Call Processing Blocked" appears, the system is telling you that
— The switch is in No-License Mode.
— The switch allows only incoming and outgoing calls to
1334
Issue 5 October 2002
mode has not been corrected/resolved, and the 10-day countdown
timer has expired.
are cleared.
the License File and the actual hardware in the switch.
before you enter No-License mode.
pre-administered numbers.