Roll Paper Cover Removal; Front Cover Removal - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

4.3.1.9 Roll Paper Cover Removal

1. Open the Roll Paper Cover.
2. Remove the upper and lower roll paper with roll shaft.
3. Remove two screws securing the Left Roll Holder and remove the Left Roll
Holder.
Guide pin
Screws
Figure 4-33.
4. Remove two screws securing the Right Roll Holder and remove the Right Roll
Holder.
Guide pin
Figure 4-34.
5. Remove the Guide Pin of right and left securing the Roll Paper Cover.
6. Remove the Roll Paper Cover.
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com

4.3.1.10 Front Cover Removal

1. Remove the R Side Cover. (Refer to 4.3.1.4 "R Side Cover Removal".)
2. Remove the L Side Cover. (Refer to 4.3.1.5 "L Side Cover Removal".)
3. Remove the I/C Holder Cover. (Refer to 4.3.1.6 "I/H Cover ASSY Removal".)
4. Open the Front Cover.
5. Remove two hexagon screws on both side.
6. Remove two screws securing the Hinge Unit L.
Screws
Hinge unit L
Thank You For Using TheServiceManualShop.com
Disassembly
Hexagon screws
Screws
Figure 4-35.
Revision D
130