EPSON EPL-C8000
3.2.16.7 FRONT COVER SWITCH R Removal (PL13.2.3)
1. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)
2. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
3. Remove the TENSION LEVER. (See Section 3.2.11.1.)
4. Remove the INNER COVER ASSEMBLY. (See Section 3.2.4.3.)
5. Remove the RIGHT COVER ASSEMBLY. (See Section 3.2.4.8.)
6. Remove the CONTROLLER PWB. (See Section 1..)
7. Remove the CONT. CHASSIS ASSEMBLY. (See Section 3.2.17.2.)
NOTE: In for following step, remember the correct connecting
position for each connector.
8. Disconnect 4 connectors (P/J191, P/J192, P/J193, P/J194) for the
FRONT COVER SWITCH R.
9. Release the hooks securing the FRONT COVER SWITCH R from
the frame. Then push the FRONT COVER SWITCH R forward to
remove.
Chapter 3
Disassembly and Assembly/Adjustment
Figure 3-142. FRONT COVER SWITCH R Removal
Be sure to install the FRONT COVER SWITCH R
securely.
Revision B
3-116