Paper Feed Solenoid Removal - Epson EPL-5700 Service Manual

EPL-5700
12. Remove the harness of paper feed solenoid, which is connected to the
paper feed unit, from the connector at the paper guide.
CHECK POINT
When installing the fixing screw, make sure that
the paper feed unit is in the frame.(See "B" in
figure4-19)
Rev. A

4.2.13 Paper Feed Solenoid Removal

1. Remove the right cover. (See section 4.2.2)
2. Remove the paper empty sensor.(See section 4.2.4)
3. Remove the control panel. (See section 4.2.6)
4. Remove the front cover.(See section 4.2.7)
5. Remove the left cover. (See section 4.2.10)
6. Remove paper feed unit. (See section 4.2.12)
7. Remove one CSB screw(3x8) securing the paper feed solenoid to the
paper feed unit, and remove the paper feed solenoid.
Paper Feed Unit
Figure 4-20. Paper Feed Solenoid Removal
Chapter4 Disassembly and Assembly
Paper Feed Solenoid
CSB(3x8)
4-15