Auto Attendant Timing - AT&T SB67030 Administrator's Manual

Auto Attendant Timing

Use Auto Attendant Timing to set the system to automatically answer calls, set the times for different opening messages to callers,
and determine where incoming calls ring.
To set up the Auto Attendant timing:
Figure 75. Enable Auto Attendant
System Configuration
Synapse Administrator's Guide
1. Log in as administrator. See
page
2. Click System Settings, then Auto Attendant, then
General Settings in the Navigation Menu at left.
3. Locate Enable Auto Attendant, shown in Figure 75.
4. Click one of the Enable Auto Attendant buttons:
82
"Log in as Administrator" on
68.
To automatically change the message according to
the schedule you set up, click the Scheduled button.
See "Auto Attendant Schedule" on page
To immediately change to a different time mode, click
the Manual button.
To choose a mode, click on the drop-down list beside
this option and select Day Menu, Lunch Menu, or
Night Menu. The default is Day Menu.
85.