System Settings - AT&T SB67030 Administrator's Manual

System Settings

You can use a Gateway, Deskset, or ATA IP address to log into the WebUI as the administrator and make changes to the system
or to individual Desksets.
When making changes to the System Settings through the WebUI, ensure that no one is using the system. You might
need to make the changes after normal office hours.
The System Settings consist of:
"System Information and WebUI Menus" on page 72
"System Basic Settings" on page 76
"Auto Attendant" on page 81
"Dial Plan Settings" on page 96
"[ATA] Fax Overview" on page 107
"[ATA] Group Mailbox" on page 110
"Hold Settings and [ATA] Music on Hold (MoH)" on page 118
"[ATA] Overhead Paging Overview" on page 122
"Paging Zones" on page 131
"Ring Groups" on page 134
"System Directory" on page 139
"Trunk Reservation (Outgoing Calls)" on page 141
"[PSTN] Trunk Routing (Incoming Calls)" on page
T1 and ATA settings and features are only available and visible in the WebUI when those devices are installed.
System Configuration
Synapse Administrator's Guide
142.
71