AT&T SB67030 Administrator's Manual page 227

Hide thumbs Also See for SB67030:
Table of Contents

Advertisement

Symptom
Deskset does not
automatically forward a call
to an outside phone number.
I am unable to manually
forward a call to Voicemail.
I am unable to transfer call
to extension.
Troubleshooting
Synapse Administrator's Guide
Probable Cause
Forwarding to outside phone
number has been disabled or
Call Forward All settings are
incorrect.
Calls forwarded to a Ring
Group cannot be forwarded
to Voicemail by a Deskset
user.
The extension is unavailable.
Corrective Action
Check that forwarding to an outside phone number has
been enabled. See
"Call Forward–NA to an Outside Phone
Number" on page
50.
Check that Call Forward All is on.
in the top right corner of the screen while in Idle mode.
Press
to turn this feature on.
Ensure that a valid outside number has been entered as a
destination number. Entering a 9 (or whatever digit, if any,
that must be dialed first for an outside call) before the
number is not necessary.
Confirm that Call Forward All Target is set to
The system administrator can designate a Deskset as a
forwarding destination if the call is unanswered. If that
Deskset does not answer the forwarded call, the call will
be forwarded again according to that Deskset's settings.
See
"To create, edit, or delete a Ring Group:" on
page
135.
Check if the destination extension is disconnected from
the network.
Ensure that the extension exists.
All the destination extension's lines may be busy.
If the party you have on hold hangs up, call back and start
the transfer process again.
227
Deskset Troubleshooting
should appear
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sb67010Sb67060Sb67040Tl7600Sb67050Synapse

Table of Contents