Deskset Reset
The Deskset has a reset button underneath that allows you to restart the Deskset or to clear most of the Deskset configuration.
Press the RESET button shown in Figure 52 by inserting a pen or paper clip into the hole and applying pressure to the button.
Before resetting the Deskset, you might want to back up its settings. See
page
174.
Press the RESET button for less than five seconds to restart the Deskset (your user settings are unaffected). You can get
the same result by unplugging the power cord, then plugging it back in. You can use this partial reset to restart if the
Deskset does not respond or fails to synchronize with the system.
Unplug the LAN cable and press the RESET button for more than five seconds to reset the Deskset to factory defaults.
See
"Appendix B: Default Settings" on page
Voicemail messages, Call Log, and the Redial list are all deleted. You can use this complete reset when assigning Desksets
to new users. If you do not disconnect the LAN cable before pressing the RESET button, the extension number is retained.
During the reset, any PC connected to the PC port momentarily loses network connectivity.
LAN Port
Getting Started
Synapse Administrator's Guide
271. The system configuration (your user settings and Personal directory) and
PC Port
Figure 52. Deskset Reset Button
"To back up the Extension Settings:" on
Reset Button
59