Figure 16 provides an illustration and description of the ATA front panel.
Power LED
Key
Used To:
Navigate through the menus, and to
increase/decrease editable fields.
Move the highlight bar to the previous or
next item in the list, respectively.
Display the ATA Main menu when in idle
mode or while in network detection mode.
Save current setting and return to previous
menu.
Terminate current operation without saving
new settings and to return to the previous
menu.
System Description
Synapse Administrator's Guide
LED
Figure 16. ATA Front Panel Description
34
Status LEDs
Menu Navigation Keys
Description
Station jack status LEDs indicate:
Off No connection detected or idle
Green
(steady) – Line activity detected
Green
(flashing) – Ringing
Audio status LEDs indicate:
Off – Not configured in the WebUI
Red
(steady) – Configured in the WebUI, but
no connection detected.
Green
(steady) – Configured and connected.
Green
(flashing) – Paging active.
Off – No power to the device.
Green
– When power is present.