AT&T SB67030 Administrator's Manual page 129

[ATA] Single-Zone Overhead Paging Delay
When attached to an FXS port, single-zone overhead paging may require the Page tone to
be delayed. If this delay is too short, the beginning of the Page heard through the OHP
speakers may be cut off. The system installer or the SA need to experiment to find the
correct delay for the system. Set the delay in the WebUI. See
Overview" on page 122.
The delay starts after the user presses
Once the delay ends, the page tone sounds and the display switches to the Page screen,
as shown in Figure 124.
When OHP is enabled, the delay is used even if a single Overhead Paging zone
is not included in the page (i.e. even if there are only Desksets in the paging zone).
On the Deskset, the All extensions option in the Paging Zones selection screen
includes the single Overhead Paging zone automatically.
.
System Configuration
Synapse Administrator's Guide
"[ATA] Overhead Paging
on the Deskset, as shown in Figure 123.
129
Paging Zones
1. All Extensions
2. Accounts
3. Design
4. Documentation
5. Management
6. Warehouse
Use or to scroll then press
SELECT or press digit.
Start
Figure 123. Paging Zones
Including Single Overhead Zone
Page
Paging Warehouse
EndPage
Press when done.
Figure 124. Page to a Single
Overhead Zone
Quick
Dial
EndPage