Recommended Installation Sequence - AT&T SB67030 Administrator's Manual

Recommended Installation Sequence

Follow the instructions in the Synapse Installation Guide for details on installing the Synapse system.
The Synapse Installation Guide can be found at
The overall installation sequence is as follows:
1. Prepare your site for installation. See
2. Install the Gateways. See "Gateway Installation" in the Synapse Installation Guide.
3. If you have only one Gateway, install the first Deskset. See "Deskset Installation" in the Synapse Installation Guide. This
Deskset is automatically assigned extension number 200 with no Direct Inward Dialing.
4. Optional: Configure the Dial Plan Settings and Direct Inward Dialing. Unless you do this, the Desksets are assigned sequential
three-digit extension numbers starting with 200 with no Direct Inward Dialing. See
Direct Inward Dial (DID)" on page
If you want the extension numbers to be something other than 200 through 2xx or if you need four-digit extension numbers,
possibly to correspond to the DID numbers, or if you want the parked-call extension numbers to start with a digit other than 1,
use the WebUI to change the Number of Digits in extension numbers or the Default Phone Extension Prefix before installing
any more Desksets.
If you want to use Direct Inward Dialing, configure it now.
If a Deskset is installed, after changing the Number of Digits and Default Phone Extension Prefix, manually change the first
Deskset extension number, and manually set its DID number.
5. Install the other Desksets. See "Deskset Installation" in the Synapse Installation Guide.
6. Optional: Install the AT&T SB67050 Analog Terminal Adapter (ATA). See "[ATA] Optional ATA Installation" in the Synapse
Installation Guide.
7. Continue configuring the system using the WebUI. See
System Description
Synapse Administrator's Guide
www.telephones.att.com/synapseguides
"Site Preparation" on page
101.
"The Web User Interface (WebUI)" on page
25
26.
"Dial Plan Settings" on page 96
.
and "[T1]
66.