AT&T SB67030 Administrator's Manual page 77

To view or modify the System Basic Settings:
Figure 70. System Basic Settings Menu, Part 1
System Configuration
Synapse Administrator's Guide
1. Log in as administrator. See
2. Click System Settings, then Basic Settings in the
3. Change the Administrator User ID and/or
4. Any Deskset can be designated as the system
77
on page 68).
Navigation Menu at left to display the screen shown
in Figure 70.
Administrator Password. The Administrator
User ID and Administrator Password are limited
to four to six digits. Values outside this range
generate an error message.
operator. Incoming calls are forwarded to the
operator extension if the caller presses 0 (zero) after
the Auto Attendant answers. If the Auto Attendant is
not enabled, the system defaults to having all
incoming calls ring as specified by the SA.
Click the drop-down list under Operator
a.
Extension.
b. Select the extension to assign as operator; the
default for systems with three-digit extension
numbers is 200.
c. To change where incoming calls ring when the
Auto Attendant is off, see
Timing" on page 82.
"Log in as Administrator"
"Auto Attendant