Ip Status - AT&T SB67030 Administrator's Manual

IP Status

This screen is for informational purposes only.
To view the IP status:
IP Settings
1. IP Configuration Auto
2. Set/Edit Static IP
3. IP Status
Use or to mov e highlight.
Use or to cy cle through options.
Save
Figure 44. IP Settings
IP Status
IP Type: Auto
192.168.0.123
IP Address:
255.255.255.0
Subnet Mask:
Gatew ay: 192.168.0.1
MAC Address: 00:11:A0:00:12:8D
Netw ork Port: Connected
PC Port: Connected
192.168.0.134
DNS Server 1:
Exit
Use or to scroll. Press when
done.
Figure 45. IP Status
Getting Started
Synapse Administrator's Guide
1. Access the Admin Settings menu: Press MENU, then press 3 on the dial pad, then
enter the Admin password, and press SELECT.
2. Press 3 on the dial pad to display the IP Settings screen shown in Figure 44.
3. Press 3 to display the IP Status screen shown in Figure 45.
4. Press the
on-screen.
Quick
Dial
The list is not circular, so when you reach the end of the available text,
pressing the
screen, pressing the
5. Press
Quick
Dial
Exit
or Navigation key to view status entries that are not shown
Navigation key has no effect. If you are at the top of the
Navigation key has no effect.
when your review is complete.
55