AT&T SB67030 Administrator's Manual page 104

To set up Direct Inward Dial numbers: (Continued)
Figure 101. DID Configuration, Part 3
System Configuration
Synapse Administrator's Guide
6. Enter the DID range into the boxes beneath Add Direct
Inward Dial Range. Click
number range into the Current DID Ranges list. These
ranges describe the DID numbers that your service
provider assigned to you. The system cannot check
whether you have subscribed to these DID numbers, but
it checks that all numbers are ten digits long, with no
spaces or hyphens, and that there are no more than 200
DID numbers.
To add only one DID number, enter it into both range
fields.
You can define up to 50 ranges.
7. Optional: To delete unwanted DID number ranges, select
the unwanted DID number range in the Current DID
Ranges list and click
8. When you are done, click
click
changes.
104
If you assign Direct Inward Dial numbers with
the first digit of any extension that overlaps an
Auto Attendant menu numeric key value, callers
will be unable to dial those extensions. Instead,
they will be connected to that Auto Attendant
menu action. See"Auto Attendant" on page
to save these settings or
to refresh the screen without saving the
to enter the phone
81.
.