AT&T SB67030 Administrator's Manual page 63

To upgrade the ATA software to the latest version: (Continued)
Figure 57. Downloading
Software
Getting Started
Synapse Administrator's Guide
3. If new software is available, you are prompted to initiate the upgrade by pressing
or abort by pressing
Once the downloading starts, the display indicates the progress as shown by the
percentage indicator, as shown in Figure 57. The device restarts automatically once
the programming is completed.
If the programming process is interrupted by removing the server connection, no
restart occurs. The process does not resume even after the server connection is
reestablished. The ATA remains on the xx% complete screen until an action is taken
at the ATA.
Pressing during the programming process terminates the download midstream
and returns you to the Configuration menu. The previous software version remains in
effect.
When the upgrade is complete, the screen briefly displays 100% complete, then 0%
complete for few seconds, before restarting the ATA.
4. Press repeatedly until you return to the ATA Main menu.
.
63
,