[Ata] Ata Front Panel Interface - AT&T SB67030 Administrator's Manual

[ATA] ATA Front Panel Interface

The ATA provides an interface to access basic information and to perform some configuration tasks at the ATA's front panel. These
tasks are easier to do using the WebUI. See
The optional ATA displays the Idle menu upon completion of the power-up sequence. Access the ATA Main menu to perform the
system operation functions. The Idle screen is different, but the menus are the same as that of the PSTN Gateway. See
Front Panel Interface" on page
03:45PM 24-Feb-09
ATA (216, 217)
Synchronized
IP: 192.168.1.4
Figure 53. ATA Idle Screen
Device Information
Netw ork Status
Configuration
Netw ork Status
IP Address: (DHCP)
192.168.0.100
Figure 54. ATA Menu Screens
Getting Started
Synapse Administrator's Guide
"The Web User Interface (WebUI)" on page
38.
To access the Gateway Main menu from the Idle screen, as shown in Figure 53, press the
key. The menu provides the following functions:
Device Information
Network Status
Configuration
Press the key to highlight an entry, then press
your ATA or your network, as shown in Figure 54. Select Configuration to view or
modify some ATA settings. Here is the information you can see in Device Information and
Network Status:
Device Information
Model #
Serial #
Boot Version
Software Version
Firmware Version
66.
Network Status
IP Address
Subnet Mask
Default Gateway
DNS Server X
MAC Address
Network Port
Local Address
60
"Gateway
to see information about