AT&T SB67030 Administrator's Manual page 103

To set up Direct Inward Dial numbers: (Continued)
Figure 100. DID Configuration, Part 2
System Configuration
Synapse Administrator's Guide
4. As shown in Figure 100, select the Outgoing Caller ID
for all Extensions. The outgoing caller ID is the Synapse
user's name and phone number that displays on the
destination telephone if it is set up to receive and display
the information.
Select Per Extension (local setting) to have each
extension send either the DID or System Pilot Number for
the caller ID number. To set the phone number, see
"Extension Basic Settings" on page
Select System Pilot Number (global setting) to have
each extension send the System Pilot Number for the
caller ID number.
5. Enter the System Pilot Number. The System Pilot
Number is usually the company's main telephone number.
103
146.