Call Forward-Na To An Extension - AT&T SB67030 Administrator's Manual

Call Forward–NA to an Extension
To forward all unanswered calls to an extension:
Call Fwd-NA Settings
Delay: [10 sec]
Target: Ext
to Ext:
Use or to mov e highlight.
Use or to cy cle through options.
Save
Figure 33. Call Fwd–NA Settings
12:30PM Thu Feb 25 2010
Ext 249
Call Forwarded to
John Smith
Ext 205.
2 Missed Calls
[Call Fw d-NA to Ext is ON]
0 New Messages
Press or to mov e highlight, then
press SELECT.
DND CallFw d Page
Figure 34. Call Forward
Confirmation
Getting Started
Synapse Administrator's Guide
1. Access the Admin Settings menu. Press MENU, then press 3 on the dial pad, then
enter the Admin password, and press SELECT.
2. Press 1 on the dial pad to display the Call Fwd–NA Settings screen shown in
Figure 33.
3. Press the
4. Press the
Quick
in the number field.
Dial
5. Enter a valid extension.
Analog telephones connected through the ATA are eligible as targets.
6. Press the
7. Press the
8. Press
Quick
Dial
After each call is forwarded, the screen shown in Figure 34 appears.
More 1/2
or Navigation key until
Navigation key to move to the to Ext: editable field. A cursor appears
Navigation key to highlight Delay.
or Navigation key to adjust the delay time in five-second increments.
to accept the change and display the Admin Settings menu.
49
is highlighted.