[Ata] Fxs Ports - AT&T SB67030 Administrator's Manual

[ATA] FXS Ports

Use the ATA Settings screen to configure the two ATA FXS ports.
To configure the two ATA FXS ports:
Figure 153. ATA Settings, Part 1
System Configuration
Synapse Administrator's Guide
159
1. Log in as administrator. See
Administrator" on page
2. Click ATA Settings in the Navigation Menu at
left. The screen shown in Figure 153 appears.
3. Select an ATA device from the drop-down list.
The rest of the ATA Settings screen displays, as
shown in Figure 154 on page
"Log in as
68.
160.