Power Four Phone RJ-45 Ethernet Mounting brackets Adapter Cords Cable and screws Figure 1. Gateway Parts List Figure 2 illustrates the AT&T SB67030 Deskset parts. Deskset Base Deskset Stand Handset Power Adapter RJ-45 Ethernet Handset Cable Cord Figure 2. Deskset Parts List AT&T SB67010/AT&T SB67030 Installation Guide...
To integrate the Headset into the system, use the “AT&T TL7600 Cordless Headset User’s Guide” on the CD that came with this product, rather than the manual that is packaged with the Headset. AT&T SB67010/AT&T SB67030 Installation Guide System Installation Overview...
Option 1 Option 2 Install the SB67030 Deskset on a desktop or mount it on a wall. The desktop setup requires the Deskset Stand and provides two positions, Option 1 at 45° and Option 2 at 60°. If you use Option 2, rotate the Handset tab as explained in “To rotate the Handset tab for wall and Deskset Option 2 installation:”...
Page 6
The display screen illuminates within about a minute. CAUTION: To help prevent the loss of system data during power outages, plug the AC power plug into an Figure 7. Power Connector Uninterruptible Power Supply (UPS). AT&T SB67010/AT&T SB67030 Installation Guide Deskset Installation...
Page 7
The corded headset Optional Corded Headset Jack takes precedence Figure 9. Optional Headset Install over the cordless headset. CAUTION: Do not plug the corded headset into the jack for the corded handset. AT&T SB67010/AT&T SB67030 Installation Guide Deskset Installation...
Page 8
Figure 12. Handset Tab 3. Replace the Handset Tab back on the base, as shown in Figure 11. Figure 10. Handset Tab Figure 12. Handset Tab Rotation Handset Tab Figure 11. Replace Handset Tab AT&T SB67010/AT&T SB67030 Installation Guide Deskset Installation...
(your user settings, Personal directory list, and the extension number). This is a complete reset, unlike the Restore Default Settings option in Admin Settings on the Deskset. Reset Button Figure 13. Deskset Reset Button AT&T SB67010/AT&T SB67030 Installation Guide Deskset Installation...
6. Insert the top mounting screw (not included) in one side and Figure 16. Bracket Installed turn it several turns to establish support. Repeat for the other side. 7. Tighten the screws. Figure 15. Rack Installation AT&T SB67010/AT&T SB67030 Installation Guide Gateway Installation...
Page 11
Figure 18 "Gateway Installation " on page 12. Wait up to one minute until the screen lights up. CAUTION: To help prevent the loss of system data during power outages, plug the AC power plug into an Uninterruptible Power Supply (UPS). AT&T SB67010/AT&T SB67030 Installation Guide Gateway Installation...
Page 12
Once the Gateway has successfully finished synchronizing with the rest of the system, the Idle screen updates with the time, date and the IP Address. NOTE: The time and date may not be correct. See “System Basic Settings” on page 17 for information on setting the time and day. AT&T SB67010/AT&T SB67030 Installation Guide Gateway Installation...
Page 13
Line 4. NOTE: When your installation is complete, back up the Deskset settings. See “Backup and Restore Settings” in the “SB67010 PSTN Gateway, SB67030 Deskset System Administrator’s Guide”. NOTE: For customer service or product information, contact the installer at the number on the cover of this www.telephones.att.com...
You can use either the Gateway menu or the WEBUI for configuration. This document describes using the WEBUI starting on page 16, which is more convenient. Refer to the “SB67010 PSTN Gateway, SB67030 Deskset System Administrator’s Guide” for information on configuration using the Gateway menu.
(Auto Attendant settings, Ring Groups, Hold message, and System Directory). LINE 1 LINE 2 LINE 3 LINE 4 BYPASS LINE 1 DC 5.1V LINE 2 RESET LINE 3 LINE 4 POWER DOWN SELECT CANCEL Reset Button Figure 21. Gateway Reset Button AT&T SB67010/AT&T SB67030 Installation Guide Gateway Installation...
6. Enter admin in the Login Name: field and 12345 in the Password field, then click . You may change your User ID and password Figure 23. Browser Entry once you are logged in. AT&T SB67010/AT&T SB67030 Installation Guide Web User Interface (WEBUI) Overview...
The administrator controls whether calls are allowed to be forwarded to outside lines. See the “SB67010 PSTN Gateway, SB67030 Deskset System Administrator’s Guide” for more information on these settings. 2. Click the Set Time by NTP Server button: AT&T recommends that the Desksets get the time and date they...
Available Extensions box and click 4. When you are done, click . The new ring group appears on the Ring Groups Summary page. Figure 26. Ring Group Settings AT&T SB67010/AT&T SB67030 Installation Guide Web User Interface (WEBUI) Overview...
7. Press Callers can use the dial pad to “spell” the users' names as they have been entered in the Display Name fields on “Extension Basic Settings” on page 26. AT&T SB67010/AT&T SB67030 Installation Guide Web User Interface (WEBUI) Overview...
Select the menu you created for that time from the appropriate Opening Menu Selection. See “Creating Auto Attendant Figure 28. Set Schedule Menus” on page 22. AT&T SB67010/AT&T SB67030 Installation Guide Web User Interface (WEBUI) Overview...
You can also create other menus that callers can choose by pressing dial keys on their phone. For instance, callers might choose to access a menu announcing your hours of operation. Figure 29. Opening Menu Selection AT&T SB67010/AT&T SB67030 Installation Guide Web User Interface (WEBUI) Overview...
3. To create a recording, click 4. Follow the procedure on the Auto Attendant Voice Prompts screen shown in “Auto Attendant Voice Prompts” on page 24. Figure 30. Auto Attendant Menu Editor - Part 1 AT&T SB67010/AT&T SB67030 Installation Guide Web User Interface (WEBUI) Overview...
Page 23
Create as many actions as you wish. Be sure to click when done. To choose your opening menu and to set the timing for your Auto Attendant, click Auto Attendant and then General Settings. AT&T SB67010/AT&T SB67030 Installation Guide Web User Interface (WEBUI) Overview...
America Press 1, For Asia, Press 3." When you record this menu, you might want to call it the “sales team” menu, which would be used in the Opening Day Menu. Figure 32. Auto Attendant Voice Prompts Menu AT&T SB67010/AT&T SB67030 Installation Guide Web User Interface (WEBUI) Overview...
Create a list of phone numbers (referred to as System list on the Deskset) that people at your business frequently call. These numbers are available to all of the extensions. See the “AT&T SB67030 Deskset User’s Guide” for more information on entering and using System Directory numbers. To set up the System Directory: 1.
The Extension Basic Settings menu displays the settings for an individual extension. For information about the items on the screens that are not described here, see “Extension Basic Settings” in the “SB67010 PSTN Gateway, SB67030 Deskset System Administrator’s Guide”. To set the Phone Settings - Basic Settings: 1.
5. When the form is complete, click Figure 36. Site Information NOTE: When your installation is complete, back up the Deskset settings. See “Backup and Restore Settings” in the “SB67010 PSTN Gateway, SB67030 Deskset System Administrator’s Guide”. AT&T SB67010/AT&T SB67030 Installation Guide...