System Basic Settings - AT&T SB67030 Administrator's Manual

System Basic Settings

To view Detailed System Information:
Figure 69. Detailed Site Information of a System with PSTN and T1
Gateways, an ATA, and Four Desksets Installed
System Configuration
Synapse Administrator's Guide
76
1. Log in as administrator. See
Administrator" on page
A screen similar to the screen shown in
Figure 65 on page 72 appears.
2. Click
lines connected, a list of all extensions, and
other information specific to each installed
device, as shown in Figure 69. There may be
a delay as the system gathers this
information.
The Connected column indicates
whether or not the listed device is
synchronized with the system, so that
communication can occur. No means the
device is registered with the system, but
not currently powered on or detected.
"Log in as
68.
to see the PSTN