Ip Settings - AT&T SB67030 Administrator's Manual

IP Settings

Synapse system devices are connected to a LAN so they can communicate with each other. See
Overview with Optional Analog Terminal Adapter" on page 18
settings.
To display the IP Settings screen:
IP Settings
1. IP Configuration Auto
2. Set/Edit Static IP
3. IP Status
Use or to mov e highlight.
Use or to cy cle through options.
Save
Figure 40. IP Settings
Getting Started
Synapse Administrator's Guide
1. Access the Admin Settings menu: Press MENU, then press 3 on the dial pad, then
enter the Admin password, and press SELECT.
2. Press 3 on the dial pad to display the IP Settings screen shown in Figure 40.
3. Perform one of the following:
Press 1 to select IP Configuration. See below.
a.
Quick b. Press 2 to select Set/Edit Static IP. See
Dial
on page
Press 3 to select IP Status. See
c.
for a discussion of the Synapse network configuration and IP
54.
"To view the IP status:" on page
52
"[ATA] System Installation
"To set and edit static IP Address:"
55.