[ATA] Single-Zone Overhead Paging
A single-zone overhead paging system issues a one-way broadcast to all overhead speakers. These speakers cannot be grouped
into separate zones. A single OHP can be connected to either the AUX OUT jack or an FXS port. Single-zone OHP is automatically
included when you page all extensions.
To create a single overhead paging zone:
Figure 122. Create Paging Zone
System Configuration
Synapse Administrator's Guide
1. Follow the instructions in
2. Select Overhead Page from the Available Members
3. Click
128
"Paging Zones" on
to either Create New Paging Zone, or
page 131
View/Edit an existing Page Zone.
list and click
.
to save these settings when you are
done or click
to return to the previous screen
without saving the changes.