AT&T SB67030 Administrator's Manual page 136

To create, edit, or delete a Ring Group: (Continued)
Figure 131. Edit Ring Group, Part 1
System Configuration
Synapse Administrator's Guide
136
4. Select the Type of Ring Group.
All Ring: All available Desksets in the Ring
Group ring simultaneously for the amount of
time set for the Ring Time. The call is then
be forwarded to the Ring Group Call Forward
No Answer (CFNA) destination.
Linear: The lowest numbered extension in
the group rings for the amount of time set in
the Ring Time. If this Deskset does not
answer, the next Deskset in numerical order
rings, and so on until all Desksets have been
rung. If the last Deskset does not answer, the
call is forwarded to the Ring Group CFNA
destination.
Round Robin: The extension that has the
next higher extension number after the last-
called extension rings. If this Deskset does
not answer, the next Deskset in numerical
order rings. This continues until all Desksets
have been rung. If the last Deskset does not
answer, the call is forwarded to the Ring
Group CFNA destination.
5. Select the Ring Time; how long each extension
rings before moving on to the next extension.
6. Select if All extensions or Idle Extensions
Only (Desksets being used are skipped) will ring.