Product Registration - AT&T SB67030 Administrator's Manual

Product Registration

In order to keep your system up to date with the latest upgrades and ensure timely
warranty support, it is extremely important to register your system. You need the MAC
address of each device to register them.
For Desksets, at the Desksets, press MENU, then press Deskset Information.
Look at the fourth line, as shown in Figure 173.
For Gateways and ATAs, at the devices, press SELECT, and DOWN (to get to
Network Status), and then DOWN until you get to MAC address, as shown in
Figure 174.
To register your Synapse system:
1. Open a new browser tab and navigate to the product registration web site
http://smbtelephones.att.com/smbui/registration/index.cfm
2. Complete the form. To enter the Gateway, ATA, and Deskset MAC addresses, copy the
information from the System Information screen and paste it into the System
Registration form. See
3. When the form is complete, click
System Configuration
Synapse Administrator's Guide
"System Basic Settings" on page
.
.
76.
188
Deskset Information
Model No: SB67030
Status: Synchronized
IP Address: 192.168.1.3
MAC Address: 00:11:A0:00:12:8D
Serial No: CBJ003235
Boot Ver: 2.5.3
P Firmw are Ver: v1.6.20
Exit
Use or to scroll. Press when
done.
Figure 173. Deskset Information
Figure 174. MAC Address
Quick
Dial
Exit