[Ata] Verified Overhead Paging Devices - AT&T SB67030 Administrator's Manual

The OHP system may have settings that need to be adjusted to work with Synapse. Refer to your OHP system's product
documentation for installation and configuration instructions.
See "[ATA] ATA Operation" on page 32
Desksets and single-zone OHPs can be included in the same zone. In the case of a single-zone OHP connected to the
FXS port, this Paging System and the Desksets generate different global tones. Note that users hear both tones at the
same time if the paging delay is set properly in the WebUI settings.

[ATA] Verified Overhead Paging Devices

Table 5 lists OHP systems that have been demonstrated to work with the Synapse System as of the publication of this document.
More OHP systems may also have qualified for this list. For more information, contact the person who installed your system. If
your installer is unavailable call
Table 5. [ATA] Verified Overhead Paging Devices
Single Zone
Aux Out Jack
Bogen TPU35B
Valcom 1030c
FXS Port
Bogen TAMB
Bogen TPU15A
Bogen TPU35B (alternate to TPU15A)
Viking CPA-7B
Valcom V-9940
Valcom V-9941A
System Configuration
Synapse Administrator's Guide
for more information on making connections to the ATA.
1 (888) 916-2007
. In Canada, dial
1 (888) 883-2474
Multi Zone
FXS Port
Bogen PCM 2000
Bogen PCM TAMB
Bogen TPU15A or TPU35B
Bogen ZPM3
126
.