Voice Messaging System And Automated Attendant - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Voice Messaging System and Automated Attendant

Voice Messaging System and
Automated Attendant
Use this procedure to specify the touch-tone duration and the interval
between digits in codes sent between a voice messaging system and the
communications system. The touch-tone duration and interval between digit
assignment must be the same as those programmed on the voice messaging
system.
This procedure specifies the integrated voice messaging ports (line/trunk
jacks) used to connect voice messaging systems such as MERLIN MAIL
Voice Messaging System or the AUDIX Voice Power-Integrated Solution II/III
application. It also specifies the generic VMI ports (line/trunk jacks) used for
automated attendants, such as MERLIN Attendant or Integrated Voice Power
Automated Attendant IS II/III.
In addition, this procedure can be used to specify the number of rings before
a call transferred by the voice messaging system is sent to the backup
position for both integrated and generic VMI ports. The number of rings
cannot be programmed for individual voice messaging systems; the single
setting applies for all. Use the Group Type procedure in "Optional Group
Features" to assign VMI ports as either integrated or generic.
11-8 Auxiliary Equipment