.
To configure Hold Settings:
Figure 115. Hold Settings
System Configuration
Synapse Administrator's Guide
1. Log in as administrator. See
page
2. Click System Settings, then Hold Settings in the
Navigation Menu at left. The screen shown in Figure 115
appears.
3. [ATA] If you have an ATA installed, complete the Hold
Music section:
4. If you want a hold announcement, complete the Hold
Announcement section:
119
"Log in as Administrator" on
68.
Enable or Disable Music on Hold.
Select the ATA jack used: AUX IN.
Enable or Disable Hold Announcement.
If you are combining the announcement with Music on
Hold, specify the amount of delay before playing the
announcement and the delay before it repeats. Your
message will periodically interrupt the music and play.
To play, record, or delete the announcement, press
.