AT&T SB67030 Administrator's Manual page 106

To manually assign Direct Inward Dial numbers: (Continued)
Figure 103. DID Assignment on Extension Basic Settings Screen
Figure 104. DID Assignments, Part 2
System Configuration
Synapse Administrator's Guide
106
5. In the center of the screen, use the Select DID
drop-down list to select a DID Number. Only
available DID Numbers appear in the list.
Select Unassigned to release the DID Number
and make it available.
If you assign a DID Number to an extension that
already has a DID Number assigned to it, the new
number is assigned; the old DID Number is
released.
6. When you are done, click
settings or click
without saving the changes.
7. To edit the DID numbers of other extensions,
select another extension from the Select
Extension drop-down list and repeat steps 5
and 6.
8. To return to the Direct Inward Dial
Assignments screen, as shown in Figure 104,
press System Settings, then Direct Inward
Dial, and then DID Assignments.
to save these
to refresh the screen