[T1] T1 Gateway Operation
Figure 13 illustrates the T1 Gateway features and connections.
Display
Provides system and network status,
device information, and configuration data.
Reset
When pressed momentarily, restarts the Gateway.
When pressed and held for more than five seconds and with the LAN
cable not connected, restores factory defaults. See
System Settings:" on page 179
System Description
Synapse Administrator's Guide
"To back up the
before restoring factory defaults.
Figure 13. T1 Gateway Features and Connections
T1 Port
DC 12V Power-Supply Jack
30
RJ-45 Ethernet Network Port
10Base-T/100Base-Tx with
Auto MDI/MDI-X switching.