To restore the System Settings:
Figure 165. Back Up/Restore System Settings, Part 2
System Configuration
Synapse Administrator's Guide
180
1. Log in as administrator. See
Administrator" on page
If practical, unplug the PSTN and T1 telephone
lines from each Gateway while restoration is in
progress to ensure you do not receive any
incoming calls.
If you have more than one Gateway, and you log
into one of the Gateways, you do not need to
unplug all of the other outside lines from the
other Gateways, just the one that you are logged
onto.
2. Click Device Management, then
Back up/Restore, then System Settings in the
Navigation Menu at left. The Back up/Restore
System Settings screen shown in Figure 165
appears.
3. Enter the name for the restore file or click
, as shown in Figure 165, and select a
system file.
Make sure you select the right file to restore. The
restore file name includes "system" and the date
and time.
4. Click
settings are restored and the Gateway restarts.
You are then logged out of the WebUI.
"Log in as
68.
. The system