AT&T SB67030 Administrator's Manual page 83

To set up the Auto Attendant timing: (Continued)
Figure 76. Enable Auto Attendant
System Configuration
Synapse Administrator's Guide
5. When you are done, click
click
changes.
83
To have all incoming calls ring at a specific Ring
Group or extension, click the Off button shown in
Figure 76.
Then select the target from the Off drop-down box.
All outside calls will be forwarded to that target as
soon as they arrive.
You can have outside calls ring at the operator, any
extension, a Ring Group, or a Ring Group of all
extensions. This option can be used by small
businesses that do not have a receptionist or where
all employees share call answering duties. Since you
can set a Ring Group to contain any or all extensions,
you can have incoming calls ring wherever you want
them to ring.
Note: If the call is not picked up, the
Call Forward–No Answer settings for either the
extension or the Ring Group apply.
to refresh the screen without saving the
to save these settings or